M66503ASP |
RFQ for M66503ASP Required Field |
 |
| Product | Manufacturers | Pack | D/C |
| M66503ASP | - | SDIP-30 | 00+ |
The M66503A is a constant current LED driver IC, whose output current is variable. The IC's functions include 16-bit
serial input/parallel output shift register with output latch.
The product uses Bi-CMOS process for highly accurate constant current driving, permitting high-efficiency LED driving
without using a resistor that limits LED current.
Settings for the LED drive current are made by an external resister,thereby ensuring a maximum output current of 30 mA,enough for anode-common LED driving.
Furthermore, the pin configuration of the IC permits easier wiring on a printed board.
Typical Application |
Features |
| LED array drivers for display panel and printer. Other various LED modules. | • Anode-common LED driving• Constant current output: Set to a value within a range between 0 and 30mA with an external resistor only.Simultaneous lighting available.• Pins (OEA, OEB) provided for forced ON/OFF of LED drive current.• Greater noise margin: Total-input Schmitt circuit is employed to deal with longer wire lengths.• Input/output CMOS compatible• Serial data output provided (SQ15)• 5V single power supply• Pin configuration for easier wiring on printed boa |
| Symbol |
Parameter |
Conditions |
Ratings |
Unit | ||
| Vcc | Supply voltage |
0.3 ~ +7.0 |
V | |||
| VI | Input voltage |
0.3 ~ Vcc + 0.3 |
V | |||
| Vo | Output voltage |
0.3 ~ + 15.0 |
V | |||
| Io | Output current |
Q0~15 |
30 |
mA | ||
| SQ15 |
±10 | |||||
| Pd | Power dissipation | M66503ASP | Measured being mounted Ta=25°C(Note 4) |
1.74 |
W | |
| M66503AGP | Measured being mounted Ta=25°C(Note 5) |
1.70 | ||||
| Tstg | Storage Temperature |
-65to+150 |
||||
